Skip to main navigation menu Skip to main content Skip to site footer
International Journal of Robotics and Automation Technology

Articles

Vol. 6 (2019)

The Design, Fabrication and Preliminary Testing of a Variable Configuration Mobile Robot

DOI
https://doi.org/10.31875/2409-9694.2019.06.6
Submitted
October 8, 2019
Published
08.10.2019

Abstract

In this paper a novel low cost mobile robot that can adjust the balance between the energy efficiency and the running performance according to the environment by changing the number of wheels is introduced. The developed robot, which can be constructed by combining the modules and is driven by Robot Operating System (ROS) tools, has a 3D light detection and distance measurement (LiDAR) for generation of 3D digital map and travels through several environment with saving the energy by adaptively changing the number and arrangement of the wheels according to the environment. The robot can easily change the three types of mechanisms by changing the number of modularized driving wheels and their combination. Furthermore, the developed robot can construct a 3D map in a rough outdoor environment and the running performance of three kinds of robots was investigated by an extensive characterization. Finally, the limits of this prototype have been meticulously analyzed, highlighting new improvements in the future perspective development for permitting an autonomous environment perception with a simple, modular and low-cost device.

References

  1. Koenig N, Howard A. Design and use paradigms for Gazebo, an open-source multi-robot simulator. In 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566) 2004; 3: 2149-2154.
  2. Forsman P Halme A. 3-D mapping of natural environments with trees by means of mobile perception. IEEE Transactions on Robotics 2005; 21: 482-490. https://doi.org/10.1109/TRO.2004.838003
  3. Tsubouchi T, et al. Forest 3D Mapping and Tree Sizes Measurement for Forest Management Based on Sensing Technology for Mobile Robots, Berlin, Heidelberg: Springer Berlin Heidelberg, 2014; pp. 357-368. https://doi.org/10.1007/978-3-642-40686-7_24
  4. Billingsley J, Visala A, Dunn M. Robotics in agriculture and forestry. In Springer handbook of robotics; Springer, 2008; pp. 1065-1077. https://doi.org/10.1007/978-3-540-30301-5_47
  5. Liang X, Litkey P, Hyyppa J, Kaartinen H, Vastaranta M, Holopainen M. Automatic Stem Mapping Using Single-Scan Terrestrial Laser Scanning. IEEE Transactions on Geoscience and Remote Sensing 2012; 50: 661-670. https://doi.org/10.1109/TGRS.2011.2161613
  6. Juman MA, Wong YW, Rajkumar RK, Goh LJ. A novel tree trunk detection method for oil-palm plantation navigation. Computers and Electronics in Agriculture 2016; 128: 172- 180. https://doi.org/10.1016/j.compag.2016.09.002
  7. Chisholm RA, Cui J, Lum SKY, Chen BM. UAV LiDAR for below-canopy forest surveys. Journal of Unmanned Vehicle Systems 2013; 01: 61-68. https://doi.org/10.1139/juvs-2013-0017
  8. Arita Y, di Maria E, Gallone R, Capodieci L, Morita M, Okubo K, Giannoccaro NI, Shige-eda M, Nishida T. Development of a Mobile Robot Platform for 3D Measurement of Forest Environments 2016; 30(1): 145-154. https://doi.org/10.20965/jrm.2018.p0145
  9. Kamikawa K, Arai T, Inoue K, Mae Y. Omni-directional gait of multi-legged rescue robot. In IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA ’04. 2004; 3: 2171-2176. https://doi.org/10.1109/ROBOT.2004.1307384
  10. Li S, Feng H, Chen K, Chen K, Lin J, Chou L. Auto-maps generation through self path generation in ROS based Robot Navigation. Journal of Applied Science and Engineering 2018; 21(3): 351-360.
  11. Ocando M, Certad N, Alvarado S, Terrones A. Autonomous 2D SLAM and 3D mapping of an environment using a single 2D Lidar and ROS. Proc. of 2017 Latin American Robotics Symposium 2017. https://doi.org/10.1109/SBR-LARS-R.2017.8215333
  12. Wang Y, Peng C, Ravankar A, Ravankar A. A single LIDARBased feature fusion indoor localization algorithm. Sensors 2018; 1294: 1-19. https://doi.org/10.3390/s18041294
  13. Quigley M, Conley K, Gerkey B, Faust J, Foote T, Leibs J, Wheeler R, Ng AY. ROS: an open-source Robot Operating System. In ICRA workshop on open source software; Kobe, Japan 2009; 3: 5.
  14. Shrivastava D. Designing of all terrain vehicle (ATV). International Journal of Scientific and Research Publications 2014; 4.
  15. Pradhan D, Sen J, Hui NB. Design and development of an automated all-terrain wheeled robot. Advances in robotics Research 2014; 1: 21-39. https://doi.org/10.12989/arr.2014.1.1.021
  16. Shah R, Ozcelik S, Challoo R. Design of a Highly Maneuverable Mobile Robot. Procedia Computer Science 2012; 12: 170-175. https://doi.org/10.1016/j.procs.2012.09.049
  17. Bickler D. US Patent Number 4,840,394—Articulated Suspension Systems, US Patent Office, Washington, DC, 1989.
  18. Harrington BD, Voorhees C. The challenges of designing the rocker-bogie suspension for the mars exploration rover 2004.
  19. Thrun S, Burgard W, Fox D. Simultaneous localization and mapping for forest harvesters; Intelligent robotics and autonomous agents; MIT Press: Cambridge, Mass 2005; ISBN 978-0-262-20162-9.
  20. Tang J, Chen Y, Kukko A, Kaartinen H, Jaakkola A, Khoramshahi E, Hakala T, Hyyppä J, Holopainen M, Hyyppä H. SLAM-Aided Stem Mapping for Forest Inventory with Small-Footprint Mobile LiDAR. Forests 2015; 6: 4588-4606. https://doi.org/10.3390/f6124390
  21. Takeuchi E, Tsubouchi T. A 3-D Scan Matching using Improved 3-D Normal Distributions Transform for Mobile Robotic Mapping. In 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems 2006; pp. 3068-3073. https://doi.org/10.1109/IROS.2006.282246