Skip to main navigation menu Skip to main content Skip to site footer
Journal of Modern Mechanical Engineering and Technology

Articles

Vol. 7 (2020)

Systems of Measurement for the Construction of Geometrical Models

DOI
https://doi.org/10.31875/2409-9848.2020.07.2
Submitted
June 25, 2020
Published
2020-06-25

Abstract

In the present work, the relevant components of the two basic system of measurement are defined through the analysis of existing systems of measurement for geometrical modeling. The major features of such systems related to the ways of formation of the two-dimensional complex drawing of a geometrical image on the basis of laws of projective connections are revealed. Interrelations of the elements of different systems of measurement with various projections of a geometrical image are defined. The relative location of projections of a geometrical image into the constructed two-dimensional complex drawings for various systems of measurement is discussed. The rationale behind a particular arrangement of views in the projective drawing of a product in the analyzed systems of measurement is explained.

References

  1. Automation of the designing and preparation production. TFLEX Parametric CAD. Moscow, Тоp Systems Publ., 2002, 41 p. (in Russian).
  2. Brailov A. Yu. Computer engineering graphics in the environment of Т-FLEX: Transformations of two-dimensional and three-dimensional models of products. Kiev, Caravella Publ., 2007, 176 p. (in Russian).
  3. Brailov A. Yu. The general algorithm of the solution of typical geometrical problems. Applied geometry and the engineering graphics. Kiev, KNUBА Publ., 2013, Issue 91, pp. 32–45. (in Russian).
  4. Brailov A. Yu. Engineering Geometry. Kiev: Caravella Publ., 2013, 456 p. (ISBN 978-966-2229-58-5). (in Russian).
  5. Bronstein I. Н, Semendjaev K. A. Handbook on the mathematician for engineers and pupils of technical colleges. Moscow, Science Publ., 1986, 544 p. (in Russian).
  6. Bubennikov A. V., Gromov М. Ya. Descriptive geometry. Moscow, Vishaya shkola Publ., 1973, 416 p. (in Russian).
  7. Vanin V. V., Bliok А. V., Gnitecka G. О. Appearance of design documentation. Kiev, Caravella Publ., 2003. – 160 p. (in Ukrainian).
  8. Glazunov Е. А., Chetverukhin N. F. Axonometry. Moscow, 1953, 291 p. (in Russian).
  9. Ivanov G. S. Design of engineering surfaces. Moscow, Mashinostroenie Publ., 1987, 192 p. (in Russian).
  10. Ivanov G. S. Descriptive Geometry. Moscow, Mashinostroenie Publ., 1995, 223 p. (in Russian).
  11. Ivanov G. S. Theoretical foundations of Descriptive Geometry. Moscow, Mashinostroenie Publ., 1998, 158 p. (in Russian).
  12. Ivanov Yu. N., Podkoritov А. N., Strigo Yu. S. Descriptive Geometry. Омsк, Омsкаya Pravda Publ., 1962, 232 p. (in Russian).
  13. Engineering Geometry with element of the theories of parameterization. V. Е. Mihajlenko, S. N. Kovalyev, N. I. Sedleckaya and other. Kiev, UМК VО Publ., 1989, 83 p. (in Russian).
  14. Korn Г, Korn T. Mathematical handbook for scientists and engineers. Moscow, Science Publ., 1978, 832 p. (in Russian).
  15. Kotov I. I., Polozov V. S., Shirokova L. V. Algorithms of computer graphics. Moscow, Mashinostroenie Publ., 1977, 231 p. (in Russian).
  16. Course of Descriptive Geometry. S. М. Kolotov, Е. Е. Dolski, V. Е. Mihajlenko and other. Kiev, Gosstrojizdat USSR Publ., 1961, 314 p. (in Russian).
  17. Course of Descriptive Geometry on the ground of computer. А. М. Tevlin, G. S. Ivanov, L. G. Nartova and other; by edit. А. М. Tevlin. Moscow, Vishaya shkola Publ., 1983, 175 p. (in Russian).
  18. Levicki V. S. Machine-building drawing. Moscow, Vishaya shkola Publ., 1988, 351 p. (in Russian).
  19. Mihajlenko V. E., Vanin V. V., Kovalyev S. N. Engineering and computer graphics: Handbook. Edited by V. E. Mihajlenko. Kiev, Karavella Publ., 2013, 328 p. (in Russian).
  20. Mihajlenko V. E. Engineering and computer graphics. V. E. Mihajlenko, V. М. Najdish, A. N. Podkorytov, І. А. Skidan. Kiyv, Vishcha shkola Publ., 2001, 350 p. (in Russian).
  21. Mihajlenko V. E. Problems in the engineering and computer graphics. V. E. Mihajlenko, V. М. Najdish, A. N. Podkorytov, І. А. Skidan. Kiyv, Vishcha Shkola Publ., 2002, 159 p. (in Russian).
  22. Podkorytov A. N., Galzman E. G., Perevalov V. F. Lectures on engineering graphics (with structurally logic schemes and algorithms of graphic constructions in solving typical problems) for students of non-mechanical specialties. – Odessa, ОSPU Publ., 1993, 83 p. (in Russian).
  23. Romanicheva E. Т., Sokolova Т. Yu., Shandurina G. F. Engineering and computer graphics. Moscow, DМК Press Publ., 2001, 592 p. (in Russian).
  24. Russian complex of the programs T-FLEX CAD/CAM/CAE/PDM. Moscow, Тоp Systems Publ., 2005, 52 p. (in Russian).
  25. Rizhov N. N. Main positional problems. Moscow, МАDI Publ., 1983, 38 p. (in Russian).
  26. Rizhov N. N. Parametric geometry. Moscow, МАDI Publ., 1988, 63 p. (in Russian).
  27. Frolov S. А. Descriptive geometry. Moscow, Mashinostroenie Publ., 1978, 240 p. (in Russian).
  28. Brailov A. Yu. The Exclusion Method of Interference in Conjugated Helicoids. Proceedings of the Eighth International Conference on Engineering Design Graphics and Descriptive Geometry (Austin, Texas, USA). ISGG, 1998, Vol. 2, pp. 443-445.
  29. Brailov A. Yu. Physical Constraints in the Control of Chip Breakability // ASME Journal of Manufacturing Science and Engineering, 1999 MED, Vol. 10, pp. 389-396 (Nashville, Tennessee, USA).
  30. Brailov A. Yu., Tigaryev V. M. Graphic Method of Determination of Ranges of a Modification of Parameters of Complicated Movements. Proceedings of the Ninth International Conference on Engineering Design Graphics and Descriptive Geometry (Johannesburg, SOUTH AFRICA). ISGG, 2000, Vol. 2, pp. 412-416.
  31. Brailov A. Yu. Interference in design. Proceedings of the Tenth International Conference on Geometry and Graphics (Kiev, UKRAINE). ISGG, 2002, Vol. 1, pp. 84-88.
  32. Brailov A. Yu. Designing using T-FLEX CAD. Proceedings of the Eleventh International Conference on Geometry and Graphics (Guangzhow, CHINA). ISGG, 2004, pp. 397-402.
  33. Brailov A. Yu. Development of a parametrical three– dimensional model of a product. Proceedings of the Twelfth International Conference on Geometry and Graphics (Salvador, BRAZIL). – ISGG, 2006, P. # A19.
  34. Brailov A. Yu. A theoretical approach to transformations of two-dimensional and three-dimensional models of the product. Proceedings of the Thirteenth International Conference on Geometry and Graphics (Dresden, GERMANY). ISGG, 2008, pp. 58-59.
  35. Brailov A. Yu. Fundamental principles of design and technological development of an engineering product. Proceedings of the Fourteenth International Conference on Geometry and Graphics (Kyoto, JAPAN). ISGG, 2010, pp. 324-325.
  36. Brailov A. Yu. Principles of product development. Engineering Graphics BALTGRAF11. Proceedings of the Eleventh International Conference (Tallinn, ESTONIA). IAB: Tallinn University of Technology Publ., 2011, – pp. 95-104.
  37. Brailov A. Yu. Laws of projective connections. Proceedings of the Fifteenth International Conference on Geometry and Graphics (Montreal, CANADA). ISGG, 2012, pp. 121-122.
  38. Brailov A. Yu. Principles of Design and Technological Development of Product. International Journal of ADVANCES IN MACHINING AND FORMING OPERATIONS. International Science Press, ISP, 2011, Vol. 3, No 1, pp. 11-17 (Detroit, Michigan, USA).
  39. Brailov A. Yu. The general approach to the solution of typical engineering geometrical problems. Proceedings of the Sixteenth International Conference on Geometry and Graphics (Innsbruck, AUSTRIA). ISGG, Innsbruck University Press Publ., 2014, pp. 444-458 (ISBN 978-3-902936-46-2).
  40. Cardone V., Iannizzaro V., Barba S., Messina B. Computer Aided Descriptive Geometry. Proceedings of the Fifteenth International Conference on Geometry and Graphics, (Montreal, CANADA). ISGG, 2012, pp. 100-109.
  41. Cervantes-Sanchez J. J., Zsombor-Murray P. Kinematics of a Mobile Overconstrained RRRCR Loop. Proceedings of the 16th International Conference on Geometry and Graphics, (Innsbruck, AUSTRIA), 2014, pp. 726-731.
  42. Cucakovic A. A., Teofilovic N. K., Jovic B. S. Descriptive Geometry Education by Using Multimedia Tools. Proceedings of the 16th International Conference on Geometry and Graphics, (Innsbruck, AUSTRIA), 2014, pp. 262-265.
  43. Honma I. A trial with teaching materials on descriptive geometry by using CAD for students with hearing impairments. Proceedings of the Fifteenth International Conference on Geometry and Graphics, (Montreal, CANADA). ISGG, 2012, pp. 296-301.
  44. Monge G. Application de l’Analyse à la Géométrie, Bachalier, Paris, 1850.
  45. Ryan D.L. CAD/CAE descriptive geometry. Daniel L. Ryan. Boca Raton: CRC Press, 1992, 209 p.
  46. Schmitt F. Descriptive geometry and 3D-CAD. Proceedings of the Eleventh International Conference on Geometry and Graphics (Guangzhow, CHINA). ISGG, 2004, pp. 257-262.
  47. Stachel H. Descriptive Geometry meets Computer Vision – the Geometry of Multiple Images. Proceedings of the Twelfth International Conference on Geometry and Graphics (Salvador, BRAZIL). ISGG, 2006, Paper #T30.
  48. Suzuki K. Traditional Descriptive Geometry Education in 3DCAD/CG Era. Journal for Geometry and Graphics. Vol. 18 (2014), No. 2, pp. 249-258.
  49. Volkov V. Ya., Yurkov V. Yu., Panchuk K. L., Ilyasova O., Kaygorodtseva N., Yakovenko K. The innovative paradigm of teaching in descriptive geometry. Proceedings of the Fifteenth International Conference on Geometry and Graphics, (Montreal, CANADA). ISGG, 2012, pp. 778-787.
  50. Weiss G. Is advanced elementary geometry on the way to regain scientific terrain? Proceedings of the Fifteenth International Conference on Geometry and Graphics, (Montreal, CANADA). ISGG, 2012, pp. 793-804.
  51. Wu H., Suzuki K. Development of spatial ability of students during elementary -, junior high-, and senior high-schools. Proceedings of the Fifteenth International Conference on Geometry and Graphics, (Montreal, CANADA). ISGG, 2012, pp. 815-823.
  52. BRITISH STANDARD BS 8888:2011Technical product documentation and specification / London: BSI Standard Publication, 2011. – 94 pp. (ISBN 978-0-580-72757-3).
  53. INDIAN STANDARD IS 15021 (Part 2): 2001, ISO 5456- 2:1996 Technical drawings — projection methods, part 2 orthographic representations / New Delhi: Bureau of Indian standards, 2001. – 12 pp.
  54. Brailov A. Yu. Engineering Graphics. Theoretical Foundations of Engineering Geometry for Design. – Springer International Publishing, 2016. – 340 p (ISBN 978-3-319-29717-0, DOI 10.1007/978-3-319-29719-4).