Skip to main navigation menu Skip to main content Skip to site footer
Journal of Modern Mechanical Engineering and Technology

Articles

Vol. 11 (2024)

Effective Technologies for Finishing and Cleaning Processing: Innovations Based on Screw Rotors

DOI
https://doi.org/10.31875/2409-9848.2024.11.06
Submitted
November 26, 2024
Published
2024-11-26

Abstract

The results of many years of scientific research in the development of machines, installations, and devices for finishing and cleaning processing of machine parts are presented. Typical diagrams of machines based on screw rotors of classes I-IV are included, along with the types of finishing and cleaning operations performed by screw rotors, requirements for the parts being processed, the processing environments, and the composition of solutions used in the finishing and cleaning of components. Additionally, the methodology and calculations for a continuous operation setup designed for finishing and cleaning parts with specified productivity are demonstrated.

References

  1. Lebedev V.A., Serga G.V., Khandozhko A.V. Increase of efficiency of finishing-cleaning and hardening pro- cession of details based on rotor-screw technological systems // MEACS, 2017 IOP Publishing IOP Conf. Series: Materials Science and Engineering 327. https://doi.org/10.1088/1757-899X/327/4/042062
  2. Lebedev V.A., Serga G.V., Davydova I.V., Atoyan T.A., Koshlyakova I.G., Gordienko A.V. Method for calculating the power of a rotor-screw machines // MATEC Web of Conferences 226.01007(2018). https://doi.org/10.1051/matecconf/201822601007
  3. Lebedev V.A., Serga G.V., Davydova I.V., Atoyan T.A., Koshlyakova I.G., Gordienko A.V. Main trends in intensification of rotor-screw procession of parts // MATEC Web of Conferences 226.01008(2018). https://doi.org/10.1051/matecconf/201822601008
  4. Sekisov A., Serga G. Rotory-screw systems for rotary Kilns // E3S Web of Conferences 91. 02034(2019). https://doi.org/10.1051/e3sconf/20199102034
  5. Marchenko A., Serga G. Creating Methodology for Calculating the drive of the drive of the working parts of the Equipment based on the original screw sieves, screw housing and screw drums // IAPS 2019, 06(03). 6855-6860 ISSN 2349-7750. https://www.iajps.com INDO American Journal of Pharmaceutical Sciences.
  6. Marchenko A., Serga G. Investigation of Particles of bulk Materials During their Movement in Helical drums//Vladimir Frolov /IAJPS 2019, 06(03). 6861- 6866 IN 2349-7750 https://www.iajps.com INDO American Journal of Pharmaceutical Sciences.
  7. Lebedev V.A., Serga G.V., Chunarhova L., Selemenev М. Processig Equipment on the Basis of Operatiye Parts in the Form of Screw Rotors With Profiled Perim- eter // MATEC Web of Conferences 297, 02004 (2019). https://doi.org/10.1051/matecconf/201929702004
  8. Sekisov, A. N. & Serga, G. V. (2020). Equipment for grinding-finishing based on screw rotors. Bulletin of Bryansk State Technical University, 5, 11-22. https://doi.org/10.30987/1999-8775-2020-5-11-22
  9. Sekisov, A. (2023). Constructions of Toroidal Screw Drums. Journal of Modern Mechanical Engineering and Technology, 10, 155-160. https://doi.org/10.31875/2409-9848.2023.10.14
  10. Sekisov, A., Volkovskaya, N., Savenko, A., Vyrodova, I. & Kuznetsova, O. (2023). Technical and technological justification of the expediency of using rotary screw equipment in the production of cement. AIP Conference Proceedings, 2911(1), 020046. https://doi.org/10.1063/5.0163133