Skip to main navigation menu Skip to main content Skip to site footer
Journal of Solar Energy Research Updates

Articles

Vol. 2 No. 2 (2015)

Design and Simulation of a New Solar Paraboloid Dish Collector

DOI
https://doi.org/10.15377/2410-2199.2015.02.02.4
Published
2021-11-26

Abstract

Solar energy utilization is vital for our society which faces the global warming problem and the increase in the prize of fossil fuels. Concentrating solar collectors are a promising technology for producing useful energy from the sun. In this study, an innovative concentrating collector with a paraboloid dish reflector is presented and simulated. The main idea of this collector is the use of a dish reflector for continuous heat production with a high concentration ratio. For this reason, a spherical receiver absorber with two linear insulated ducts is used. The cost of this system is relative low because there is not a glass cover but a tracking system is required. The final results show better performance than the typical collectors such as the flat plate collectors and the evacuated tube collectors, fact that makes this collector a promising solution. The design and the simulation are carried out with the commercial software Solidworks, in the flow simulation studio.

References

  1. Al-Sulaiman FA, Dincer I and Hamdullahpur F. Energy and Exergy Analyses of a Biomass Trigeneration System using an Organic Rankine Cycle. Energy 2012; 45: 975-985. http://dx.doi.org/10.1016/j.energy.2012.06.060
  2. Kalogirou SA. Solar thermal collectors and applications. Progress in Energy and Combust ion Science 2004; 30: 231-95. http://dx.doi.org/10.1016/j.pecs.2004.02.001
  3. Hermann WA. Quantifying Global Exergy Resources Energy 2006; 31: 1685-1702.
  4. Rayegan R and Tao YX. A Procedure to Select Working Fluids for Solar Organic Rankine Cycles (ORCs). Renewable Energy 2011; 36: 659-670. http://dx.doi.org/10.1016/j.renene.2010.07.010
  5. Bravo Y, Carvalho M, Serra LM, Monné C, Alonso S, Moreno F, et al. Environmental Evaluation of Dish-Stirling Technology for Power Generation. Solar Energy 2012; 86(9): 2811-2825. http://dx.doi.org/10.1016/j.solener.2012.06.019
  6. Woodhead Publishing Limited 2012. Concentrating Solar Power Technology Principles. developments and applications. Edited by Keith Lovegrove and Wes Stein. http://dx.doi.org/10.1533/9780857096173
  7. Andraka CE. Dish Stirling Advanced Latent Storage Feasibility. Energy Procedia 2014; 49: 684-693. http://dx.doi.org/10.1016/j.egypro.2014.03.074
  8. Lecuona A, Nogueira JI, Ventas R, Rodríguez-Hidalgo MdC and Legrand M. Solar Cooker of the Portable Parabolic Type Incorporating Heat Storage Based on PCM. Applied Energy 2013; 111: 1136-1146. http://dx.doi.org/10.1016/j.apenergy.2013.01.083
  9. Abu-Malouh R, Abdallah S and Muslih IM. Design, Construction and Operation of Spherical Solar Cooker with Automatic Sun Tracking System. Energy Conversion and Management 2011; 52(1): 615-620. http://dx.doi.org/10.1016/j.enconman.2010.07.037
  10. Bellos E, Tzivanidis C and Antonopoulos KA. Thermal Performance of a Direct-Flow Coaxial Evacuated Tube with Solidworks Flow Simulation. 6th International Conference on "Experiments/ Process/ System Modelling/ Simulation/ Optimization, Athens 2015; 8-11 July.
  11. Bellos E, Tzivanidis C, Korres D and Antonopoulos KA. Thermal Analysis of a Flat Plate Collector with Solidworks and Determination of Convection Heat Coefficient between Water and Absorber. ECOS Conference Pau France 2015.
  12. Tzivanidis C, Bellos E, Korres D, Antonopoulos KA and Mitsopoulos G. Thermal and Optical Efficiency Investigation of a Parabolic Trough Collector. Case Studies in Thermal Engineering 2015; 6: 226-237. http://dx.doi.org/10.1016/j.csite.2015.10.005
  13. Jesús Ángel M-D, Juan Manuel O-R, Omar J-S, Marco Antonio Z-A and Armando E-O. Analysis of Flow and Heat Transfer in a Flat Solar Collector with Rectangular and Cylindrical Geometry Using CFD. Ingeniería Investigación y Tecnología, volumen XIV 2013; 4: 553-561.
  14. Ingle PW, Pawar AA, Deshmukh3 BD and Bhosale KC. CFD Analysis of Solar Flat Plate Collector. International Journal of Emerging Technology and Advanced Engineering 2013; 3(4): 337-342.
  15. Amraoui MA and Aliane K. Numerical analysis of a three dimensional fluid flow in a flat plate solar collector. International Journal of Renewable and Sustainable Energy 2014; 3(3): 68-75. http://dx.doi.org/10.11648/j.ijrse.20140303.14
  16. Álvarez A, Mu-iz MC, Varela LM and Cabeza O. Finite element modelling of a solar collector. International Conference on Renewable Energies and Power Quality (ICREPQ'10) Granada (Spain) 23th to 25th March, 2010.
  17. Manjunath MS, Vasudeva Karanth K and Yagnesh Sharma N. Three Dimensional Numerical Analysis of Conjugate Heat Transfer for Enhancement of Thermal Performance using Finned Tubes in an Economical Unglazed Solar Flat Plate Collector. Proceedings of the World Congress on Engineering 2011 Vol III WCE 2011, July 6-8, 2011, London UK.
  18. Pavlovic SR, Stefanovic VP and Suljkovic SH. Optical Modeling of a Solar Dish Thermal Concentrator Based on Square Flat Facets. Thermal Science 2014; 18(3): 989-998. http://dx.doi.org/10.2298/TSCI1403989P
  19. Kalogirou SA. Solar thermal collectors and applications. Progress in Energy and Combustion Science 2004; 30(3): 231-295. http://dx.doi.org/10.1016/j.pecs.2004.02.001